Görüntülenen Ürünler
It is an all-around versatile plate for all job sites that place high demands on the machine's performance potential. Its other outstanding characteristics are high operator comfort and a long service life. It is perfectly suited for the compaction of building back-fill, and of frost and sub bases when constructing roads, paths and parking lots. The 69 Hz frequency makes the DPU 4545 suitable for all purposes and compacts even medium-weight interlocking paving stone reliably. The model version DPU 4545Hec is equipped with Compatec, the compaction control by Wacker Neuson. This is also available as a retrofit kit for all DPU 4545He models starting with the year 2011.
![]() | Very low hand-arm vibrationsThe particularly designed Wacker Neuson guide handle provides a hand-arm vibration of under 2,5 m/s².This allows for an all-day continuous operation without impairment and risk to the user. All documentation requirements are omitted if an operator only works with equipment that has acceleration values below 2.5 m/s². |
![]() | Compatec - Compaction ControlThe model version DPU 4545 Hec is equiped with Compatec Wacker Neuson's compaction control. If the number of lights no longer increases, Retro-Fitting for DPU 4545 He are also available. |
![]() | Intuitive guide handle designChange the direction of travel and control speed simply by moving the handle forwards and backwards. |
![]() | Available with crank handle or electric starter.The electric starter model is conveniently started with an ignition key. A loud signal tone prevents inadvertent draining of the battery. |
Compatec compaction control shows you when the soil is adequately compacted. Over compaction and overload can be avoided. | On job sites as well as on transportation vehicles: thoughtful details make the transport of our Vibratory Plates comfortable and easy. |
Especially in continuous use low hand-arm vibrations (HAV) are essential. Our reversible vibratory plates can be used without any time limit and mostly even without documentation requirements. | For particular user friendliness all Wacker Neuson models are easy and simple to use. |
High reserve capacity and long service life are the characteristics of the engines of all models - available with diesel or gasoline engines |
| DPU 4545 H | DPU 4545 He | DPU 4545 Hec | |
|---|---|---|---|
| Çalışma verileri | |||
| İşletme ağırlığı kg | 402 | 423 | 425 |
| Santrifüj kuvveti kN | 45 | 45 | 45 |
| Ana tabla boyutları (G x U) mm | 440 x 900 | 440 x 900 | 440 x 900 |
| Ana tabla kalınlığı mm | 12 | 12 | 12 |
| Yükseklik (çatalsız) mm | 790 | 790 | 790 |
| Çalışma genişliği (montaj tertibatlı) mm | 600 | 600 | 600 |
| Frekans Hz | 69 | 69 | 69 |
| Arka dingil pimi maks. (zemin ve çevre koşullarına bağlıdır) m/dak | 21 | 21 | 21 |
| Yüzey performansı maks. (zemin ve çevre koşullarına bağlıdır) m²/h | 761 | 761 | 761 |
| Taşıma yüksekliği mm | 1.540 | 1.540 | 1.540 |
| Taşıma uzunluğu mm | 1.048 | 1.048 | 1.048 |
| Taşıma genişliği mm | 780 | 780 | 780 |
| Motor verileri | |||
| Motor türü | Air-cooled single-cylinder, four-cycle diesel engine | Air-cooled single-cylinder, four-cycle diesel engine | Air-cooled single-cylinder, four-cycle diesel engine |
| Motor üreticisi | Hatz | Hatz | Hatz |
| Motor | 1D42S | 1D42S | 1D42S |
| Motor hacmi cm³ | 445 | 445 | 445 |
| Motor gücü maks. (DIN ISO 3046) kW | 6,4 | 6,4 | 6,4 |
| devirde 1/dak | 2.850 | 2.850 | 2.850 |
| İşletme gücü maks. (DIN ISO 3046) kW | 4,9 | 4,9 | 4,9 |
| devirde 1/dak | 3.000 | 3.000 | 3.000 |
| Yakıt tüketimi l/h | 1,8 | 1,8 | 1,8 |
| Depo içeriği (Yakıt) l | 5 | 5 | 5 |
| Güç aktarımı | From drive motor via centrifugal clutch and V-belt direct to exciter. | From drive motor via centrifugal clutch and V-belt direct to exciter. | From drive motor via centrifugal clutch and V-belt direct to exciter. |
| Yakıt türü | Diesel | Diesel | Diesel |